CITROEN C5 2005 - Page 185

181
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Engines: RHM - RHT - RHW - 4HW
Removing.
Remove:
- The closing panel of the clutch casing (block the engine flywheel, tool [5]).
- The auxiliary drive pulley screw.
Refit the screw without the washer.
Remove:
- The auxiliary drive pulley, using tool [8].
- The tool [5].
Turn the crankshaft.
Peg:
- The engine flywheel, tool [2] (engine DW12TED4).
- The engine flywheel, tool [9] (engine DW10ATED4).
B1EK0TVC
B1EK1T4D
B1EK0TUC
C8
Angl.T3-page032-190-2005 4/02/05 15:15 Page 181