257
AXLES
SUSPENSION
STEERING
257
AXLE GEOMETRY
Front axle Rear axle
A> B =Negative figure: – = TOE-OUT
A < B = Positive figure: + = TOE-IN
NOTE
Vehicle
All types
Tracking
Adjustable
0 to -3 mm
0° to -0° 25’
3° 03' ± 30' -0° ± 30' 12° 56' ± 30'
4,5 ± 1,3 mm
0° 38’ ± 0° 11’
- 1° ± 20'
No adjustable No adjustable
Castor Camber
King pin
inclination
Tracking Camber
B3CP02UC
C5
All types except CARLSSON
NOTE: Front of the vehicle indicated by the arrow.
Castor : Dissymmetry less than 0° ± 30'.
Camber : Dissymmetry less than 0° ± 30'.
King pin inclination : Dissymmetry less than 0° ± 30'.
IMPERATIVE: Distribute the total tracking symmetrically between
the LH wheel and the RH wheel.
Camber : Dissymmetry less than 0° ± 30'.
Angl. T3-page256-281-2005 4/02/05 15:25 Page 257
To Next Page
Loading...
