69
ENGINE
SPECIAL FEATURES: TIGHTENING TORQUES (m.daN)
Engines: RHL - RHR
Diesel injection circuit
Injector fixing flange nut
Pre-tightening 0,4 ± 0,1
Angular tightening 65° ± 5°
Fuel high pressure common injection rail on engine block 2,2 ± 0,2
Unions on fuel high pressure common injection rail
Pre-tightening 2 ± 0,2
Tightening 2,5 ± 0,2
Injection on diesel injector
Pre-tightening 2 ± 0,2
Tightening 2,5 ± 0,2
Diesel injection pump on support 2,2 ± 0,2
Diesel injection pump pulley 5 ± 0,5
Union on diesel high pressure pump
Pre-tightening 2 ± 0,2
Tightening 2,5 ± 0,2
Cooling circuit
Coolant pump
Pre-tightening 0,3 ± 0,1
Tightening 0,9 ± 0,1
Coolant outlet housing
Pre-tightening 0,3 ± 0,1
Tightening 0,7 ± 0,1
C5
Angl.T3-page032-190-2005 4/02/05 15:15 Page 69
To Next Page
Loading...
