Form No. 56043161 - Clean Track
®
L24 - 11
Batteries and Chargers
Attention: See the Electrical System section for battery installation, battery maintenance and charger
system requirements.
Lubricating the Machine
Lubricate the following components:
Refer to Figure 1.
• Once a month lubricate the General
Pivot Points for the Brush Linkage
(A). For best results, use a silicone
spray.
• Once per quarter, grease the Rear
Caster Wheel Swivel (B). Wipe off
any excess grease to avoid staining
carpet.
Figure 1
Front