Form No. 56043161 - Clean Track
®
L24 - 43
Vacuum Shoe Maintenance
Check the vacuum shoes daily. Remove any built-up string, hair or carpet bers. To remove:
1. Press the red Scrub OFF Switch (H). Turn the master Key Switch (A) off.
2. Remove the Debris Hopper (29).
Note:Removetheleftsideshoefirsttoallowclearancefortherightsideshoetoslideout.
3. See Figure 13. Disconnect the Vacuum Hoses from the Vacuum Shoes (10).
4. Pull up on the Ring (42) and hold up while pulling the Vacuum Shoe forward, then out of the machine.
5. Repeat steps 3 and 4 for the right side Vacuum Shoe.
6. Follow the above steps in reverse order to reassemble.
Figure 13