To Next Page

To Previous Page

42 - Form No. 56043161 - Clean Track

L24

Maintenance of the Vacuum Motor Inlet Screens

Figure 12

The two Vacuum Motor Inlet Screens (4) should be

cleaned on a daily basis. DO NOT run water down the

screens in an attempt to clean them. If you do this you

will be running water directly into the vacuum motors.

Remove the Screens (4) from the machine to clean them,

then reinstall.

Spray Nozzle Maintenance

Remove the spray nozzles once a week. Soak the nozzles overnight in a vinegar and water solution to remove any

chemical deposits.

Clarke Clean Track® L24 56317170 User Manual

Questions and Answers: