Modules & Options
7 - 34 3G Module
7
Before installing the application, make sure that the 3G module is ON (installing
the driver with the module off will not allow the software to detect the module hard-
ware correctly). Use the Fn + key combination (see Table 1 - 4, on page 1 - 12)
or Control Center button to toggle power to the
3G module.
Make sure you install
the drivers in the order indicated in
Table 4 - 1, on page 4 - 3
.
Note that exiting the
application does NOT turn off the 3G module.
• Wireless Manager - See “Wireless Manager Installation” on page 7 - 35 for
driver installation information and “Wireless Manager Application” on page 7
- 36 for instructions on using Wireless Manager.
• AirCard Watcher - See “Sierra Wireless AirCard Watcher Installation” on
page 7 - 57 for driver installation information and “AirCard Watcher Applica-
tion” on page 7 - 58 for instructions on using AirCard Watcher.
• Mobile Partner - See “Mobile Partner Application Installation” on page 7 -
71 for driver installation information and “Mobile Partner Application” on
page 7 - 72 for instructions on using Mobile Partner.
• See “3G Settings (Windows 8)” on page E - 42 for Windows 8 configuration
information.
3G Modules &
System Wake Up
Note that the 3G modules
DO NOT
support system
wake up on 3G modem
activity.