cmotion cPRO - Page 76

All content © 2020, cmotion GmbH. All specications are subject to change without further notice.
http://www.cmotion.eu
page 76 of 120
NOTICE
The FIZ metadata from the cPRO LCS will be written into the custom memory of the RED
Digital Cinema .R3D RAW les. This data can then be extracted from the .R3D RAW les
using a command line application by entering “REDline --i [lename.R3D] --printMeta 6” and
conrmed by pressing ENTER.
SONY Venice:
Note: This set-up will require 2x cPRO motor, 2x cPRO camin, or a combination of both if
camera control is also being used.
Cables required: [C0XE-K08] Cable CAM (7p) - Sony Remote (8p) / D-Tap
(camera control)
[K2.0015759] Cable CAM (7p) - ENG (12p) (data feed)