Chapter 3: Calls, faxes and SMS
58 Use a phone or fax machine (SBU)
When you have an already established call you can initiate a conference
call by using the following options:
To forward a call (SBU)
You can set up the system to automatically forward incoming calls to
another phone number. This information is saved in the BGAN network so it
is available when the call cannot be put through and must be forwarded.
This service is usually set up by the airtime provider.
To forward incoming calls do as follows:
1. Access the web interface from a connected computer, open a browser
and type the address: http://192.168.0.1 (default). The DASHBOARD
page is displayed.
2. Select SETTINGS > Common > Call forward from the left navigation
pane.
If you want to: Do as follows:
Add an incoming
call announced by
the Call Waiting
indication.
Press R 2 #, the already established call is put on
hold and the incoming call is connected for you to
have an initial conversation with the caller before
the call is added to the conference call.
Then press R 3 #, you are returned to the held calls
and the incoming call is joined in the conference call.
Initiate a new call
and have it joined
to the already
existing call.
Press R <phone number> #, to initiate a new call
and have an initial conversation before the call is
added to the conference call.
Then press R 3 #, you are returned to the held calls
and the initiated call is joined in the conference call.
Clear all calls. Press R 1 # or alternatively just hang-up.
To Next Page
Loading...
