Chapter 3: Calls, faxes and SMS
Use a phone or fax machine (SBU) 61
3333
To send a fax message (ground to air) (SBU)
To send a fax message to the system, dial
+ <Mobile number> #
• + is the prefix used in front of the country code for international calls.
• Mobile number. The first part of the mobile number is always 870,
which is the “country code” for the BGAN system.
To send a fax to a G3 fax use the 3.1 kHz Audio mobile number
To send a fax to an ISDN G4 fax use the UDI number.
The numbers are listed in the documentation from your service
provider. If the mobile numbers are listed in the web interface, you can
look them up as follows:
Connect a computer, access the web interface and select PHONE
BOOK > Mobile numbers. For further information, see To view the
mobile numbers and additional numbers on page 175.
To receive a fax message
An analog fax machine connected to the system can only receive a fax with
3.1 kHz Audio. Refer to To select the incoming call type (SDU) on page 36.
An ISDN G4 fax machine connected to the AVIATOR 700 system can only
receive a fax with a call type UDI.
Before sending or receiving fax messages, make sure both
fax units are in “Overseas” mode.
There are four mobile numbers, one for 3.1 kHz Audio, one for
Standard voice, one for UDI and one for RDI.
To Next Page
Loading...
