. . . . . . . . . . . . . . . . . . . . . . . . .
D-2
Power Cord Set Requirements
Part Number: 262446-001 Writer: Dianne Fielden Saved by: JohnnieA
Saved Date: 02/26/96 1:22 PM 12:18 PM File Name: APPD.DOC
Country-Specific Requirements
Power Cord Set Requirements
Country
Accredited
Agency
Applicable Note
Numbers
ustralia EANSW 1
ustria OVE 1
Belgium CEBC 1
Canada CSA 2
Denmark DEMKO 1
Finland FIMKO 1
France UTE 1
Germany VDE 1
Italy IMQ 1
Japan JIS 3
The Netherlands KEMA 1
Norway NEMKO 1
Sweden SEMKO 1
Switzerland SEV 1
United Kingdom BSI 1
United States UL 2
Notes
:
1. Flexible cord must be <HAR> Type HO3VV-F, 2-conductor,
0.75 mm
2
conductor size. Power cord set fittings (appliance
coupler and wall plug) must bear the certification mark of the
agency responsible for evaluation in the country where it will be
used.
2. Flexible cord must be Type SPT-2 or equivalent, No. 18 AWG,
2-conductor. Wall plug must be a two-pole type with a NEMA 1-
15P (15A, 125V) configuration.
To Next Page
Loading...
Need help?
General