. . . . . . . . . . . . . . . . . . . . . . . . .
8-6
Working with PCMCIA Devices
Part Number: 262446-001 Writer: Dianne Fielden Saved by: Dianne Fielden
Saved Date: 02/28/96 12:20 PM 12:29 PM File Name: CH8.DOC
Removing a PC Card
The computer does not need to be turned off or placed in Standby
(Suspend) to remove a PC Card. To remove a card:
1. Click the PC Card indicator on the taskbar and click "Stop" for
the card you want to remove.
2. When the system prompts you to remove the card, swing the top
or bottom release lever to the left until the card ejects. (The PC
Card release levers are located on the front of the computer on
the left side.)
3. Gently grasp the card and pull it out. The computer beeps
(high-low tone) to indicate card removal.
NOTE
: If the speakers are turned off, system beeps are not
audible.
Removing a PC Card with Attached Cable
PC Card Software
To manage and configure PC Cards effectively, your computer
provides PC Card software. This software includes drivers for the
most popular PC Cards and other features designed to make PC
Cards simple to use. For information about this software, refer to
the online Compaq Reference Guide.
To Next Page
Loading...
Need help?
General