. . . . . . . . . . . . . . . . . . . . . . . . .
5-6
Using Security
Part Number: 262446-001 Writer: Dianne Fielden Saved by: JohnnieA
Saved Date: 02/27/96 1:16 PM 12:27 PM File Name: CH5.DOC
Initiating Quick Controls
Quick Controls establish security measures when your computer is
turned on but not in use. After setting the power-on password in
Passwords Properties, Quick Controls can be initiated in two ways:
1. With
Fn+F6
hotkeys, which work only on the computer
keyboard.
2. With the key combination
Ctrl+Alt+L,
which works on both the
computer and external keyboards.
NOTE:
To exit QuickLock/QuickBlank once it has been activated,
enter your power-on password.
To Next Page
Loading...
