. . . . . . . . . . . . . . . . . . . . . . . . .
Diagnostics
10-5
Part Number: 262446-001 Writer: Dianne Fielden Saved by: JohnnieA
Saved Date: 02/26/96 10:45 AM 12:20 PM File Name: CH10.DOC
To run View System Information (INSPECT), follow these steps:
1. Turn on or restart the computer by pressing the power button.
2. As soon as the cursor is displayed in the upper-right corner of the
screen, press
F10
.
IMPORTANT
:
The cursor is displayed on the screen for about two
seconds. If you do not press
F10
during this time, you must
restart the computer and try again.
3. If prompted, select the desired language.
The Configuration and Diagnostics menu is displayed.
4. Select View System Information (INSPECT).
To Next Page
Loading...
