107
VECTOR
CHASERS, LOOPS, AND FANS
To control chaser rate on-the-fly
Change the fader function to rate by pressing RATE and use the fader to
control the chaser rate.
Figure 32: Enable faders for rate control
Or
1. Press the large
RATE key.
Figure 33: Enable the Rate wheel
2. Press SELECT for the playback device that is running the chaser.
3. Use the rate wheel to adjust the chaser speed.
To preset the chaser rate
1. Press SETUP.
The
Playback Properties dialog box opens.
2. Press
SELECT for the fader hosting the chaser.
3. Set the
Chaser Rate field, using the field arrows or the parameter
wheels.
4. Press
OK.
The chaser rate is saved as an attribute of the QList.
To Next Page
Loading...