89
VECTOR
PLAYBACK
Loading and releasing playback devices
All playback devices have a SELECT key. This key allows loading a Qlist
or a temporary cue and also serves to commission the master playback
device. Each
SELECT key has a green LED. When the playback device is
the master playback the LED is on.
Note: There can be only one (1) master playback.
Each playback device has a LED above the
SELECT key. The LED color
represents assignment types.
To load a Qlist to a playback device
1. Choose the Qlist: QLIST #.
2. Press
SELECT for a playback device. The Qlist is loaded to the
selected device. The LED above
SELECT is lit.
To load a range of QLists
Select the QLists (QLIST # #) and press SELECT for a playback device.
The selected QLists are loaded to consecutive playbacks.
ATTENTION! If the selected range contains more QLists than the
playback devices available on the current page, the remainder is loaded
to the next page.
Example: The selected range of QLists is 1 through 15 with QList 1
loaded to playback 1on page 1; QLists 11 through 15 will be loaded to
playbacks 1 through 5 on page 2.
LED Color Assignment Type
Green QList
Red Chaser
Orange Temporary cue Tempo ra ry C u es
(see
page 103)
To Next Page
Loading...
Need help?
General
