Compulite Vector Ultra Violet User Manual

40
Compulite
Chapter 3
About selecting fixtures and setting values
There are many ways to select fixtures and filter fixture selections.
Parameter values are set using wheels,
Editor tool bar options, the
numeric keypad, or a combination of the parameter keys and the
numeric keypad.
To select fixtures and set parameter values
Example: Select spot 1  12 set and set values.
1. Press
SPOT.
2. Press
1  12 on the numeric keypad.
3. Use the wheels to set parameter values.
4. Press the parameter type keys to switch parameter wheel banks.
5. Save the lighting state as a cue. See:“
Storing QLists and cues” on
page 69.
To select fixtures and set parameter values
Example: Select spot 1  12 set and set parameter levels.
1. Press
SPOT.
2. Press
1  12 on the numeric keypad.
3. Use the wheels to set parameter values.
4. Press
ENTER to output levels
5. Press the parameter type keys to switch parameter wheel banks.
6. Repeat steps 3 and 4.
7. Save the lighting state as a cue. See:“
Storing QLists and cues” on
page 69

Compulite Vector Ultra Violet Specifications

General

Brand	Compulite
Model	Vector Ultra Violet
Category	DJ Equipment
Language	English