34
Compulite
Chapter 2
Applying the patch and exiting the patch manager
Apply the patch when you want to save the patch, update the show,
and continue working in the
Patch Manager. Neglecting to apply the
changes in the patch while continuing to work in the
Patch Manager can
cause anomalies. For instance, you have cleared the patch for a number
of fixtures and now attempt to patch using the DMX addresses you just
cleared.
If you have not applied the patch after clearing, the system generates
the message: Patch Exists. Applying the patch after the clear operation
prevents this type of error.
To apply the patch
Click .
To exit the Patch Manager
1. Click . You are asked to save the patch data.
2. Click
YES to save changes. Click NO to exit without saving.
Note: If you chose YES, exiting the patch manager automatically
applies the patch.
To Next Page
Loading...