Compulite Vector Ultra Violet - Blind Mode

82
Compulite
Chapter 4
Blind Mode
You can program and update cues in the blind Mode. When the blind
mode is active, the fixture values in the live editors are not output.
When
BLIND is active it is indicated in the command line:
Using the blind editor
To activate the blind editor
Press BLIND.
The key’s LED is on.
To store cues in blind mode
1. Press BLIND to switch to the blind editor.
2. Select fixtures and assign values.
3. Use any store sequence, including
STORE, SELECT.
Note: When storing a cue in blind mode, the playback device does not
advance to the new cue.
To exit the blind editor
Press BLIND.
The key’s LED turns off and the blind editor indication is removed from
the command line.