81
VECTOR
PROGRAMMING AND UPDATING CUES
To update cues
1. Select the fixtures and adjust the values.
2. Press
UPDATE.
The
Update Items dialog box opens.
3. Press
SELECT for the playback device where the cue is output.
OR
1. Select the cue, select the fixtures, (
CUE #, CHANNEL/SPOT #) and
adjust the values.
2. Press
STORE.
The cue is stored with the new values.
ATTENTION! Using UPDATE also, by default, updates libraries. If you do
not want to update libraries now, deselect
UPDATE ALL LIBS in the Update
dialog box
To Next Page
Loading...