57
VECTOR
SELECTING AND CONTROLLING FIXTURES
Example: Set color and image values.
1. Select the fixtures.
2. Press
COLOR to switch to the color wheel bank and use the
appropriate wheel to set the color value.
3. Press
IMAGE to switch to the image wheel bank and use the
appropriate wheel to set the value.
To move parameter steps
For absolute moves from step to step:
Use
, located on the Editor tool bar.
Setting values using pickers
Vector has preset pickers for gobo and color parameters. Pickers show
bitmaps that logically correspond to the steps.
Some pickers have more than one page. Use the
PREVIOUS and NEXT
buttons that appear in the picker to page.
Figure 18: Gobo picker
To Next Page
Loading...
Need help?
General
