Compulite Vector Ultra Violet - Page 119

113
VECTOR
CHASERS, LOOPS, AND FANS
4. Optional - choose DELAY.
5. Press
FAN.
6. Choose the fan type.
7. Use the parameter wheel to set the spread.
8. Store as a cue.
To set fan timing
1. Select fixtures.
2. Select a parameter and assign values
3. Press
ENTER.
4. Press
TIME.
5. Optional - choose
DELAY.
6. Press
FAN.
7. Choose the fan type.
8. Use the parameter wheel to set the time.
9. Store as a cue.