19
VECTOR
SETTING UP AND OVERVIEW
To add and configure workspaces
1. In the window, right click anywhere and choose Add View on the right
click menu.
Or
Go to the
Window menu Window Options and choose Add Workspace.
A workspace is added to the window. Its tab appears to the right of
the last tab.
2. Right click the new tab.
The display control, right click menu opens.
3. Choose
Rename View.
4. Type a new name for the workspace and press
ENTER.
5. Through the
Window menu divide the workspace into panes and add
tabs, as necessary.
6. Open the
Workspace tree .set up the view. (See:“Using the
Workspace tree” on page 20).
Example: If you have created a Live workspace, you will probably
want to show the live fixture displays, the master playback display,
and the playback wing display.
7. Optional - Save this as a display layout (See:“To
save a workspace”
on page 25).
To Next Page
Loading...