72
Compulite
Chapter 4
2. Press ENTER.
The values are output.
1. Press
STORE.
2. Press
CUE and press NEXT.
The next available cue number is displayed in the command line
with the QList number for the cue on the master playback.
3. Press
ENTER.
The cue is automatically added to the QList on the master playback.
To store point cues
Example: Store cue 2.5 in QList 1 that is on the AB playback.
1. Select fixtures and assign values.
2. Press
ENTER.
3. Press
STORE.
4. Press
2 5.
5. Press
SELECT.
The command line shows:
Playback AB Assigned: QList 1 Cue 2.5 Stored.
Cue 2.5 is output from AB.
IMPORTANT! In Compulite mode, storing a cue does not clear the
editor and the cue is not output from the playback device.
In tracking mode, storing a cue clears the editor. The stored cue is
immediately output from the playback device.
To Next Page
Loading...
Need help?
General
