Comtech EF Data UT-4500 Series - UTILITY:) TIME (Real-Time Clock) Submenu; UTILITY:) DISP (VFD Display) Submenu; UTILITY:) FIRMWARE Submenu

UT-4500 Series C- and Ku-Band Up Converters MN/UT4500.IOM
Front Panel Operation Revision 3
6–23
6.2.7.1 (UTILITY:) TIME (Real-Time Clock) Submenu
This function follows Military time format (00 to 24 hours).
Edit Real-Time Clock:
HH:MM:SS MM/DD/YY
Edit the time and date settings of the real-time clock. Use the   keys to select
a digit to edit, and then use the  keys to change that digit. Press ENTER.
6.2.7.2 (UTILITY:) DISP (VFD Display) Submenu
VFD Display Brightness:
100%
Edit the display brightness. Use the  keys to select a brightness value of
25%, 50%, 75%, or 100%. Press ENTER when the brightness is suitable.
6.2.7.3 (UTILITY:) FIRMWARE Submenu
THESE MENUS ARE INTENDED FOR DIAGNOSTIC PURPOSES ONLY. DO
NOT CHANGE AN IMAGE UNLESS OTHERWISE INSTRUCTED BY
COMTECH EF DATA PRODUCT SUPPORT.
This series of submenus permits you to view information about the UT-4500
internal firmware. The converter can store two complete firmware images, and
you can select which image will be loaded the next time the unit reboots.
Firmware Images:
INFO SELECT
Use the   keys to select INFO or SELECT. Press ENTER.