Comtech EF Data UT-4500 Series - Unit Connectors; Figure 4-5. UT-4500 Series Rear and Front Panels; Figure 4-6. UT-4500 Series Rear Panel - Initially Released Chassis (OBSOLETE)

UT-4500 Series C- and Ku-Band Up Converters MN/UT4500.IOM
Front and Rear Panel Connectors Revision 3
4–7
4.2 Unit Connectors
External cables are attached to connectors provided on the rear and front panels
of the unit (Figure 4-5).
The UT-4500 chassis, as initially released (Figure 4-6), does not provide
an ‘Ethernet’ RJ-45 port. Ethernet interface operation is not available on
these legacy products.
(TOP) Rear Panel with Optional -48VDC Power Interface
(CENTER) Rear Panel with Standard AC Power Interface (with TSM)
(BOTTOM) Front Panel
Figure 4-5. UT-4500 Series Rear and Front Panels (UT-4505 Current
Production Chassis shown)
Figure 4-6. UT-4500 Series Rear Panel – Initially Released Chassis
(OBSOLETE) (with TSM)