Comtech EF Data UT-4500 Series - Configuration Commands;Queries Quick Reference; Redundancy Commands;Queries Quick Reference; Status Commands;Queries Quick Reference

UT-4500 Series C- and Ku-Band Up Converters MN/UT4500.IOM
Serial Interface Operation Revision 3
8–10
8.7.1.2 Configuration Commands/Queries Quick Reference
Sect.
Item
Description
Syntax
8.7.3.1
FRE
Set Frequency
<DEV/FRE_xxxxx.xxx{cr}
8.7.3.2
IFF
Set IF Frequency
<DEV/IFF_xxx{cr}
8.7.3.3
ATT
Set Attenuation
<DEV/ATT_xx.xx{cr}
8.7.3.4
CLD
Select Cold Start Mode
<DEV/CLD_xxx{cr}
8.7.3.5
MUT
Mute/Unmute Converter
<DEV/MUT_xxx{cr}
8.7.3.6
CMM
Configure Mute Mode
<DEV/CMM_xxx{cr}
8.7.3.7
CRM
Set Redundant Mute Mode
<DEV/CRM_xxx{cr}
8.7.3.8
AFR
Set Fault Recovery Mode
<DEV/AFR_xxx{cr}
8.7.3.9
PGM
Set a Preset
<DEV/PGM_nn_xxxxx.xxx_yy.yy{cr}
8.7.3.10
DPS
Get All Presets
<DEV/DPS_{cr}
8.7.3.11
CLR
Clear a Preset
<DEV/CLR_nn{cr}
8.7.3.12
SEL
Select a Preset
<DEV/SEL_nn{cr}
8.7.1.3 Redundancy Commands/Queries Quick Reference
Sect.
Item
Description
Syntax
8.7.4.1
RED
Set Redundancy Mode ON/OFF
<DEV/RED_xxx{cr}
8.7.4.2
ICT
Configure Redundant Converter
<DEV/ICT_xx_yy{cr}
8.7.4.3
SAM
Select Auto/Manual Mode
<DEV/SAM_xx_y{cr}
8.7.4.4
FBU
Forced Backup Mode
<DEV/FBU_xx_y{cr}
8.7.1.4 Status Commands/Queries Quick Reference
Sect.
Item
Description
Syntax
8.7.5.1
RCS
Return Configuration Status
<DEV/RCS_{cr}
8.7.5.2
RMS
Return Maintenance Status
<DEV/RMS_{cr}
8.7.5.3
RUS
Return Utility Status
<DEV/RUS_{cr}
8.7.5.4
RAS
Return Alarm Status
<DEV/RAS_{cr}
8.7.5.5
SAS
Summary Alarm Status
<DEV/SAS_{cr}
8.7.5.6
TSC
Terminal Status Change
<DEV/TSC_{cr}
8.7.5.7
PACRCS
Packed Configuration Status
<DEV/PACRCS_{cr}
8.7.5.8
PACRMS
Packed Maintenance Status
<DEV/PACRMS_{cr}
8.7.5.9
PACRUS
Packed Utility Status
<DEV/PACRUS_{cr}
8.7.5.10
PACRAS
Packed Alarm Status
<DEV/PACRAS_{cr}