Comtech EF Data UT-4500 Series - IF Input; Noise Figure; Level; Range

UT-4500 Series C- and Ku-Band Up Converters MN/UT4500.IOM
Specifications Revision 3
2–8
2.2.7 IF Input
2.2.7.1 Noise Figure
13 dB Maximum @ 0 dB Attenuation
2.2.7.2 Level
-35 dBm Typical
2.2.7.3 Range
Contact Comtech EF Data Product Support for your specific requirements.
• STANDARD: 52 to 88 MHz or 104 to 176 MHz
• OPTIONAL: 50 to 90 MHz or 100 to 180 MHz
2.2.7.4 Impedance
50Ω or 75Ω
2.2.7.5 Return Loss
23 dB minimum with I/O Module or Switch Module
2.2.8 RF Output
2.2.8.1 Output Level
• C-Band:+17 dBm @ 1 dB Compression
• Ku-Band: +10 dBm @ 1 dB Compression
2.2.8.2 Intermodulation
• C-Band: -50 dBc @ 0 dBm Output SCL
• Ku-Band: -38 dBc @ 0 dBm Output SCL