Copystar CS-2030 - Page 322

3A7
1-4-8
• 15 cpm copier
Original Copy
example 1
Copy
example 2
Reference
Figure 1-4-11
Enter maintenance mode.
Place an original on the DF
and make a test copy.
Yes
No
Start
End
Change the setting using the
zoom +/– keys.
• For copy example 1, increase
the value.
• For copy example 2, decrease
the value.
Exit maintenance mode.
Press the stop/clear key.
Is the image correct?
Enter “072” using the numeric
keys and press the start key.
Press the interrupt key.
Press the start key.
The new setting
is stored.
Setting range: –39 to +39
Changing the value by 1 moves the center line
by 0.17 mm.
Reference: 0