Copystar CS-2030 - Installing the Handset (Optional for 120 V Specifications Only)

3B1
1-2-6
1-2-4 Installing the handset (optional for 120 V specifications only)
<Procedure>
1. Fit the handset retainer to the handset holder using
the two M3 × 5 cross-head chrome binding screws.
2. Secure the handset retainer to the right cover using
the two M3 × 10 cross-head TP-A chrome screws.
3. Place the handset on the handset holder.
Figure 1-2-3
Figure 1-2-4
Handset holder
Handset retainer
Screws
(M3 × 5 cross-head chrome
bindin
g
screws
)
Handset
Handset holder
Screws
(M3 × 10 cross-head
TP-A chrome screws)
Handset retainer