3BN/3A4
1-3-2
(2) Paper misfeed detection condition
(2-1) Finisher
• Jam between the finisher and copier (jam code 80)
No signal indicating the completion of paper ejection is output from the finisher within 15 s of the paper conveying switch
(PCSW) turning off.
• Jam during batch ejection standby (jam code 81)
No signal requesting batch ejection is output from the finisher within 15 s of the ejection of the last sheet to the
intermediate tray.
• Jam during paper conveying for batch ejection 1 (jam code 82)
When ejecting a stack of paper, the paper conveying switch (PCSW) does not turn on within 1250 ms of the start of forward
rotation of the paper conveying motor (PCM).
1250 ms
PCM
PCSW
Off
On
Off
On
Fwd. rotation
Timing chart 1-3-1
When ejecting a stack of paper, the paper conveying switch (PCSW) does not turn off within 6320 ms of turning on.
6320 ms
PCSW
Off
On
Timing chart 1-3-2
• Jam during paper conveying for batch ejection 2 (jam code 83)
When ejecting a stack of paper, duplex paper conveying switch 1 (DUPPCSW1) does not turn on within 1250 ms of the
paper conveying switch (PCSW) turning on.
1250 ms
PCSW
DUPPCSW1
Off
On
Off
On
Timing chart 1-3-3
When ejecting a stack of paper, duplex paper conveying switch 1 (DUPPCSW1) does not turn off within 1640 ms of turning
on.
1640 ms
DUPPCSW1
Off
On
Timing chart 1-3-4
To Next Page
Loading...
