Copystar CS-2030 - Page 324

3A7
1-4-10
• 15 cpm copier
Original
Copy
example 1
Copy
example 2
Figure 1-4-13
Enter maintenance mode.
Enter “071” using the numeric
keys and press the start key.
Yes
No
Start
End
• For copy example 1,
increase the value using
the zoom + key.
• For copy example 2,
decrease the value using
the zoom – key.
Press the interrupt key.
Exit maintenance mode.
Press the stop/clear key.
Place an original on the
DF and make a test copy.
Is the image correct?
Setting range: –32 to +32
Reference: 0
Changing the value by 1 moves
the copy image by 0.19 mm.
Increasing the value moves the copy
image backward, and decreasing it
moves the image forward.
Press the start key.
The new setting is stored.
Light the copy exposure indicator
exp. 1 using the copy exposure
adjustment keys.