3B5
1-4-3
(3) Cleaning the stapler
During periodic maintenance, remove all the staples remaining inside the machine due to failure of stapling.
Procedure
1. Open the front and conveying covers of the
copier.
2. Remove the staple cartridge.
3. Remove the four screws securing the stapler
cover and then the cover.
4. Remove the staples attracted to the magnet
on the inside of the stapler cover.
5. Refit all the removed parts.
Stapler cover
Staple cartridge
Magnet
Staple
Figure 1-4-3
To Next Page
