3B6
2-1-1
2-1-1 Construction of each section
The job separator consists of the components shown in Figure 2-1-1. It switches the paper path to eject copied paper to the
job separator tray.
Figure 2-1-1 Job separator
1 Job eject roller
2 Job eject pulley
3 Job separator tray
4 Job separator eject switch (JBESW)
5 Ejected paper detection switch (EPDSW)
Figure 2-1-2 Job separator block diagram
JBESW
CN35-1
CN35-11,12
CN35-7
EPDSW
MPCB
FSSOL
To Next Page
