3B5
2-1-2
(1) Paper conveying operation in sort mode
When a copy is made in the sort mode, the feedshift solenoid (FSSOL) turns on and the feedshift guide of the copier
operates to switch the paper path to the paper conveying unit. After curling of the conveyed paper is eliminated by the curl
eliminator rollers, the paper is conveyed to the intermediate tray by the feedshift roller. When the trailing edge registration
cursor of the intermediate tray shifts the paper stocked in the intermediate tray to the stopper, the pickup solenoid (PUSOL)
turns on to lift the press roller and release the stopper. The stack of paper on the intermediate tray is ejected to the eject tray
by the feedshift roller and eject roller.
Figure 2-1-3
Stopper (PUSOL:ON)
Press roller
Feedshift roller
Feedshift pulley
Feedshift claw
Small feedshift claw
Eject roller
Eject pulley
Pick up solenoid
Feedshift guide
(FSSOL:ON)
Stopper (PUSOL:OFF)
Press roller
Feedshift roller
To intermediate tray
Feedshift pulley
Feedshift solenoid
Upper curl
eliminator
roller
Lower curl
eliminator roller
To eject tray
To Next Page
Loading...
