To Next Page

To Previous Page

TigoMaster 2TH – PROFINET User Manual

Page 7 of 69

1. Introduction

1.1. About

This user manual describes the TigoMaster 2TH IO-Link Wireless Master. TigoMaster 2TH serves as a

wireless decentralized input/output device within an Ethernet Device Configuration Network.

The product and its firmware are under development so that functionality changes may occur. As such,

information provided in this user manual is preliminary and may not be complete or error free.

Note:

The TigoMaster 2TH IO-Link Wireless Master can be used with either the PROFINET

(Part Number: CT241-0003t2-02) or the EtherNet/IP (Part Number: CT241-0004t2-01)

protocol. This version of this user manual only focuses on the PROFINET protocol.

References:

• TigoEngine – User Manual

1.2. Typographical Conventions

• Enumerations are shown in a list form with bullet points.

• Instructional steps are shown in a numbered list form.

• Decimal numbers are shown without additional indicators and are not spelled out (e.g., 123).

1.3. Symbols

1.4. Deviating Views

The product views and illustrations in this user manual may deviate from the actual product. They are

intended only as illustrative material.

Symbol

Meaning

Note: This symbol indicates a general note.

Warning: This symbol indicates a security notice which must be observed.

Reference: This symbol indicates a cross-reference to other documentation ( available on

request).

CoreTigo TigoMaster 2TH-PROFINET User Manual

Questions and Answers: