10 Artiglio Master Code User Manual
• Care should be taken to arrange the cord so that it will not be tripped over or pulled.
9. Risk of Eye Injury. Flying debris, dirt and fluids may be discharged
during bead seating and the inflation process. Remove any debris
from the tyre tread and wheel surfaces. Wear OSHA, CE or other
approved safety glasses during mount and demount procedures.
10. Always inspect the machine carefully before using it. Missing, broken, or worn equip-
ment (including warning stickers) must be repaired or replaced prior to operation.
11. Never leave nuts, bolts, tools or other equipment on the machine. They may become
trapped between moving parts and cause a malfunction.
12. NEVER install or inflate tyres that are cut, damaged, rotten or worn. NEVER install a
tyre on a cracked, bent, rusted, worn, deformed or damaged rim.
13. If a tyre becomes damaged during the mounting process, do not attempt to finish
mounting. Remove from the service area and properly mark the tyre as damaged.
14. To inflate tyres, use short bursts while carefully monitoring the pressure, tyre, rim and
bead. NEVER exceed the tyre manufacturer’s pressure limits.
15. This equipment has internal arcing or sparking parts which should not be exposed
to flammable vapours (gasoline, paint thinners, solvents, etc.). This machine should not
be located in a recessed area or below floor level.
16. Never operate the machine if you are under the effects of alcohol, medications and/
or drugs. If you are taking prescription or over the counter medication, you must consult
a medical professional regarding any side effects of the medication that could hinder
your ability to operate the machine safely.
17. Always use OSHA, CE or other approved and mandated Personal
Protective Equipment (PPE) during use of the machine. See your
supervisor for more instructions.
18. Remove jewellery, watches, loose clothing, ties and restrain long hair before using
the machine.
19. Wear non-slip safety footwear when operating the tyre changer.
20. Wear proper back support and employ a proper lifting technique when placing, mov-
ing, lifting or removing wheels from the tyre changer.
21. This machine may only be used, maintained or repaired by properly trained employ-
To Next Page
Loading...
