Artiglio Master Code User Manual 85
UK
in the ERROR MESSAGES chapter in this manual.
9. Turn the machine back on (Fig. 68i) to enable calibration.
5.9.m. DIAGNOSTIC P3K
1. Select UPDATE TPMS then press the confirm
key
(Fig. 69).
CRUSHING HAZARD:
Some parts of the machine, such as the head, the bead breakers and turntable
move by themselves.
A beeper will sound to indicate when automatic movements are carried out.
Do not approach moving parts of the machine.
WARNING
2. At the end, Fig. 69a will be displayed.
If error messages are displayed, check the mes-
sages in the ERROR MESSAGES chapter in this
manual.
UPDATE P3K
1. Insert the key with the updated software into the USB socket
(Fig. 70) of the MASTER CODE and wait 10 seconds.
2. Select UPDATE P3K
then press the confirm key
(Fig. 70a).
68i
69
70
70a
69a
To Next Page
Loading...
