100 Artiglio Master Code User Manual
MOUNTING
- Fit a new nozzle, adjusting the fluid outlet correctly
- Close the mobile metal sheet and turn
- Tighten the two screws
- Connect the nozzle fluid delivery tube
- Check the nozzle operating position. The sprayed jet must fall between the disc and rim.
- Refit the guard and tighten the two fastening nuts.
7. MAINTENANCE
When the machine is disconnected from the air supply system, the devices marked
with the warning sign shown above may remain pressurised.
DANGER
The “Spare Parts” manual does not authorise the user to do any work on the machine
except for that specifically described in the operator’s manual, but does enable the
user to provide accurate information to the after-sales service, in order to reduce
service times.
Do not remove or modify any part of this machine (except for servicing).
Any operation intended to modify the setting value of the relief valve or pressure
limiter is forbidden. The manufacturer declines all liability for damage resulting
from tampering with these valves.
Before making any adjustments or carrying out maintenance, disconnect the electric-
ity and compressed air supplies from the machine and make sure that all moving
parts are suitably immobilised.
WARNING
WARNING
WARNING
WARNING
To Next Page
Loading...
