Artiglio Master Code User Manual 101
UK
Keep the working area clean. Never use compressed air, jets of water or solvent to
remove dirt or residues from the machine. When cleaning, take care to avoid creat-
ing and raising dust as far as possible.
CORGHI declines all liability for claims deriving from the use of non-original spares
or accessories.
NOTICE
SCHEDULED MAINTENANCE:
The machine will periodically prompt maintenance to carry out. Failure to observe
instructions could affect proper functioning of the machine.
NOTICE
- Check regulator filter condensate drain:
The filter-regulator is equipped with a semiauto-
matic condensation drain device. This device op-
erates automatically whenever the compressed
air supply to the machine is cut off. Drain the
condensation by hand (1, Fig. 79) when the level
rises above level 2, Fig. 79.
To carry out every month
- Clean and lubricate tool hold turret carriage
guide (1, Fig. 79a):
Clean with environmentally-friendly solvents and
lubricate with LIPLEX EP 2 lubricant or equivalent.
To carry out every two months
- Lubricate tool holder turret translation screws
(2, Fig. 79a):
Clean with environmentally-friendly solvents and
lubricate with MOLYguard lube PTFE ISO 68 oil or
equivalent.
To carry out every three months
CAUTION
1
79
2
79a
1
2
To Next Page
Loading...
