24 Artiglio Master Code User Manual
3.2. INSTALLATION CLEARANCES
The machine must be installed in accordance with all applicable safety regula-
tions, including but not limited to those issued by OSHA.
Risk of Explosion or Fire. Never use the machine in an area where it will be exposed
to flammable vapours (gasoline, paint thinners solvents, etc.). Never install the ma-
chine in a recessed area or below floor level.
IMPORTANT: for the correct and safe operation of the machine, the lighting level in
the place of use should be at least 300 lux.
Do not install the machine outdoors. It is designed for use in an indoor, sheltered area.
Install the tyre changer in the chosen work
position, complying with the minimum clear-
ances shown in Fig.14.
The surface must have a load-carrying capacity
of at least 1000 kg/m
2
.
Work environment conditions
- Relative humidity 30% - 95% without conden-
sation.
- Temperature 0°C - 50°C.
4. ARTIGLIO MASTER CODE DESCRIPTION
ARTIGLIO Master Code is an electropneumatically operated universal tyre changer to change car,
off-road and light commercial vehicle tyres.
With ARTIGLIO Master Code any type of tyre with a rim from 13” to 32” can easily be broken,
mounted and demounted. Further improvements have been made:
WARNING
CAUTION
14
To Next Page
Loading...
