Corghi Artiglio Master Code - Camera

Artiglio Master Code User Manual 91
UK
- If the problem persists, contact technical assistance.
A06
Tubeless procedure or overinflation selected.
- Carry out deflation, when necessary.
A08
Operation stopped with the stop key.
A10
The pressure has not increased after several attempts.
Hose not connected
- connect the disconnected hose.
Air circuit leak
- repair the leak
Broken solenoid valve.
- contact technical assistance.
A11
Inflation or deflation time which is too long
A12
The pressure has not decreased after several attempts.
Air circuit obstruction
- remove the obstruction.
Broken solenoid valve.
- contact technical assistance.
A13
Pressure which is too high
A14
Eeprom read error
A15
Eeprom write error
Besides error messages, other messages may also appear on the display indicating the
machine status. These are:
AU
Self-calibration programme;
uuu
This message appears on the large screen during self-calibration and indicates that the
pressure value is being read: do not move the air hose or change the pressure.
6.2. CAMERA
From the main screen (Fig. 74) press the key
.
The camera is an electronic precision instrument
to display all operations carried out on the tyre
underside, on a specific screen, guaranteeing
74