20 Artiglio Master Code User Manual
2. TRANSPORT, STORAGE AND HANDLING
Conditions for transporting the machine
The tyre changer must be transported in its original packing and stowed in the position shown
on the packing itself.
- Packing dimensions:
• width ............................................................................................................................... 1150 mm
• depth .............................................................................................................................. 1950 mm
• height .............................................................................................................................. 2100 mm
- Weight of wooden packing:
• STD version ........................................................................................................................kg 710
Machine storage and shipping specifications
Temperature: -25° - +55°C.
Do not stack other goods on top of the packing or damage may result.
NOTICE
Handling
To move the packing, insert the tines of a fork-lift
truck into the slots on the base of the packing itself
(pallet) (Fig.3).
Before moving the machine, refer to the HOISTING/
HANDLING section.
Keep the original packing in good conditions to be used if the equipment has to be
shipped in the future.
NOTICE
2.1. UNPACKING
Remove the upper part of the packing and make sure the machine has not been damaged
during transportation.
3
To Next Page
Loading...
