96 Artiglio Master Code User Manual
ture range. It is not possible to carry out operations according to the WDK procedure.
Temperature < 15 °C and >30 °C. The tyre temperature must be restored to the permit-
ted range.
- Press the key
(see Fig. 76c) to exit the TEMPERATURE MEASURING SENSOR and
go back to the main screen.
TROUBLESHOOTING
The sensor does not read correctly
Sensor connector disconnected or not connected
properly
- Connect the connector properly (see Fig. 76d).
Sensor or read circuit failure
- If the problem persists, contact technical as-
sistance.
6.5 TPMS
From the main screen (Fig. 77) press the key .
The TPMS is an electronic device to read pressure
sensors and check their operation, directly on the
tyre changer. Specifically, the operator can:
- Check sensor integrity and operation before car-
rying out any operation on tyres
- Check that the sensors convey the correct pres-
sure and temperature values
- Check sensor battery status
- Acquire information on mounting and the torque values of the valves
- Acquire the spare part codes of valves
- Check integrity and operation after carrying out operations on tyres
- Update the vehicle/valve database from the company site via USB
Intended operating conditions
The TMPS has been designed exclusively to diagnose the correct operation of pressure
sensor valves, as described in this manual. Any other use is inappropriate.
Technical specifications
- Power supply…………………………12Vdc
Operation
- Press key to enable the TMPS.
77
76d
To Next Page
Loading...
