50 Artiglio Master Code User Manual
TOOL REMOVAL
PHASE 7: Press the icon (Fig.33) to
remove the tool from the work area and position the
inflation valve at 3 o’clock.
At the end of the operation the INFLATRON (optional) will be recalled or you will
be returned to the main screen.
For correct use of the INFLATRON see section 6.1.
NOTICE
5.4.b BASIC AUTOMATIC FEATURES (4 sequences)
AUTOMATIC ACQUISITION OF WHEEL DATA
For an optimal reading of dimensions, the wheel must be beaded.
NOTICE
The top bead breaker automatically hooks during the descent phase.
PHASE 1: Press the icon (Fig. 34a) to edit
image and automatically acquire and store the size of
the wheel or of the rim only.
WARNING
33
34a
To Next Page
Loading...
