Corghi Artiglio Master Code - Page 49

Artiglio Master Code User Manual 49
UK
Proceed with mounting the top bead using the bead presser (Fig. 32f) and, if necessary, the
bead presser pliers (Fig. 32g).
Take care to avoid any injuries. Ensure that the top bead is correctly loaded on the
tool before carrying out mounting (Fig. 32g).
- Press the pedal to start rotation until the second bead has been mounted.
Take care to avoid any injuries. Make sure the top bead is correctly inserted in the
rim well, throughout the mounting stage.
- Remove the bead pressing pliers or the bead pressing tool.
Position the bead pressing tool in the correct rest
position (Fig. 32h) so that it does not interfere with
the work area.
WARNING
WARNING
WARNING
32g
32f
32h