EasyManua.ls Logo

corob Tatocolor - Page 9

corob Tatocolor
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-GENERAL INFORMATION 2-3
COROB™ TATOCOLOR
Risk Preventive measure Reference in
the manual
Injuries and abrasions caused by
sharp edges and end parts of the cans
to be handled
– Wear appropriate personal protective
equipment (cut-proof gloves)
chapter 7
Dorsal/lumbar injuries caused by
handling of heavy loads
– Appropriate personnel training
– Do not exceed the weight limits
stated by the current regulations in
force (kg 20 for women, kg 30 for
men)
chapter 7
Crushing caused by the movements of
the manual shelf
– The machine must be used by a
single operator
– Wear appropriate personal protective
equipment (gloves)
– Appropriate personnel training
chapter 7
Crushing caused by the movement of
the Autocap
– Appropriate personnel training chapter 7
Injuries during can punching
operations
– The machine must be used by a
single operator
– Keep hands away from the can lid
– Wear appropriate personal protective
equipment (gloves)
– Appropriate personnel training
chapter 7
In case of a power blackout, the
timed processes may unexpectedly
start when power returns
– Appropriate personnel training
– Only trained personnel may intervene
in reduced safety conditions
chapter 7
chapter 8
Contact or inhalation of colorants
during the canister refilling operations
– Keep the room suitably ventilated
– Wear appropriate personal protective
equipment (safety goggles, gloves
and mask)
– Appropriate personnel training
chapter 7
Contact or inhalation of colorants
during the cleaning operations of the
nozzle center and moistening of the
Autocap sponge
– Keep the room suitably ventilated
– Wear appropriate personal protective
equipment (safety goggles, gloves
and mask)
– Appropriate personnel training
chapter 8
Crushing during the cleaning
operations of the nozzle center
– Appropriate personnel training
– Only trained personnel should carry
out these operations
chapter 8
Injuries during assembly/disassembly
operations of the punch tool
– Wear appropriate personal protective
equipment (cut-proof gloves)
– Appropriate personnel training
– Only trained personnel should carry
out these operations
chapter 8

Table of Contents