132 • 4-Series™ Control Systems Product Manual — Doc. 8559B
Server
The following settings can be configured for the auto update server if Auto Update is turned on:
l
Enter a username for accessing the auto update server in the Username text field.
l
Enter a password for accessing the auto update server in the Password text field.
Crestron Devices
The following settings can be configured for updating connected Crestron devices if Auto
Update is turned on:
l
Enter a username for pushing automatic updates to controlled Crestron devices in the
Username text field.
l
Enter a password for pushing automatic updates to controlled Crestron devices in the
Password text field.
Schedule
The following settings can be configured for scheduling automatic updates if Auto Update is
turned on:
l
Use the Day of Week drop-down menu to select a day of the week to check for and
perform automatic updates.
o
Select Daily to check for new updates every day.
o
Select None to only check for new updates manually.
l
If a value is provided for Day of Week other than "None," enter a time of day (in 24-hour
format) when the control system will check updates on the scheduled day.
l
If "None" is selected for Day of Week, enter the polling interval (in hours) for when the
control system will poll the server for updates.
l
Select Update Now to check the update server for new firmware and to update the
control system immediately if new firmware is available.
To Next Page
Loading...
