Commands
80 AlterPath PM Installation, Administration, and User’s Guide
unlock
Unlocks an outlet or group of outlets in the current state. The response to this
command is a list of status lines, one per power port.
Syntax
unlock <outlet number>
Arguments
<outlet number> Outlet number, such as “5”, outlet name such as
“sunfire”, or group of outlets such as “1, 3-5”
Examples
To unlock outlets 2, 3, and 8, type:
ver
Shows the current software version.
Syntax
ver <IPDU#>
Arguments
<IPDU#> IPDU number in a daisy chain
pm>unlock 2,3,8
2: Outlet unlocked.
3: Outlet unlocked.
8: Outlet unlocked.
To Next Page
Loading...