Plugging Devices Into AlterPath PM Outlets
32 AlterPath PM Installation, Administration, and User’s Guide
Plugging Devices Into AlterPath PM Outlets
In order to control power on a device, the device must be plugged into at least
one of the AlterPath PM’s power outlets.
T To Plug Devices Into AlterPath PM Outlets
1. Connect a device’s power cable to one of the AlterPath PM's outlets.
2. Repeat step one until all of the AlterPath PM’s power outlets are used.
Powering On the AlterPath PM
Power on the AlterPath PM in order to begin managing power of its connected
devices.
T To Power On the AlterPath PM
• Plug the power cable into an adjacent AC power source.
Important: The AlterPath PM must be powered by a receptacle with adequate circuit
protection.
To Next Page
Loading...